B0862 Lexus Auto Trouble Code
B0862 Lexus OBD2 may also be triggered by faults earlier down the line. For example, a dirty MAF sensor might be causing the car to overcompensate in its fuel-trim adjustments. As a result, oxygen sensors are likely to report fuel mixture problems.
The computer notices the canister is empty when it detects a leaner condition (all the vapors are used up) and it resumes normal fuel delivery. Some car manufacturers then close the vent solenoid but leave the purge solenoid open. That creates a vacuum throughout the entire fuel storage system. Once the correct vacuum is reached, it closed the purge solenoid and waits to see if the vacuum holds.
B0862 Lexus Possible Solution:
The firing order is an important part of the overall design of the engine and is determined during the design of the engine to eliminate as much engine vibration as possible. If the firing order is changed or adjusted, the ignition from the spark plug is delivered at the wrong time and the engine functions poorly or does not run. The firing order for a particular engine is typically found in the repair manual specific to that model.
B0862 Lexus Description For All Models :
- Lexus Daytona
- Lexus Es
- Lexus Flv
- Lexus Gs
- Lexus Gx
- Lexus Is
- Lexus Is200
- Lexus Is220
- Lexus Is250
- Lexus Is300
- Lexus Lf
- Lexus Ls
- Lexus Ls 300
- Lexus Ls 350
- Lexus Lx
- Lexus Minority Report
- Lexus Rx
- Lexus Rx 300
- Lexus Rx400h
- Lexus Rx450h
- Lexus Sc
|
B0862 Lexus Trouble Repair :
B0862 Lexus code shows that location the body harness connector, located in and around the left hand kick panel area or inside the IP (consult a shop manual for location). Water can leak into the connector from clogged sunroof drains, A-pillar leaks, or windshield or cowling leaks. |
Code Search
Please fill the search bar to find Auto Trouble Code meaning.